Setting the Rotary Feeder Feed Deck Angle
The angle of the rotary feeder feed deck can be adjusted up and down to accommodate different size
material.
Rotary Feeder Deck Angle Settings
Use this table as a reference to adjust the rotary feeder deck to the proper angle.
Material Type Deck Position
#10, A4 (Single Sheet) 1
Half-fold, non-glossy (single sheet) 1
Half-fold, glossy 0
Folded, perfume 3
BRE 1
Booklet (thick .125" max) 4
Booklet (thin) 0
Operator Adjustments
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 126 of 328
To Next Page