Loading a Mode
DC uses operating modes to run applications on the inserter. A mode contains the unique combination of
system settings for processing a specific job. Some setting examples include timing parameters, file
locations, scan code layout, forms length, and the icons displayed on the main DC screen.
Note:
In order to see available modes you must be logged in to DC. Typically, operators load modes, they do
not create them.
Loading a Mode
Before you run a job, load the mode.
1. Log in to DC.
2. Click the Mode button on the main DC screen.
3. Select Load Mode from the drop-down menu.
Using Direct Connect
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 35 of 328
To Next Page
Loading...