Adjusting the Engine Tongue Position
The engine tongue helps guide the collation into the open envelope and prevents it from catching on the
envelope throat. The tongue position needs to be adjusted when the throat of the envelope changes.
To adjust the engine tongue position:
1. Lift the engine cover.
2. Lift the upper engine to access the vacuum deck.
3. Open the flap of the envelope and fold the flap inside, so the envelope throat is showing.
4. Align the top of the envelope (flap crease line) with the deck lines shown here. (This is where the
envelope is staged. All adjustments should be made from this position.)
Envelope Flap Against Insert Ledge
Operator Adjustments
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 60 of 328
To Next Page
Loading...