Removing Material Jams in the Buffer
There are three covers that provide access to different areas of the buffer to help when clearing jams. Lift
these covers to access and remove the jammed material.
Note:
This image shows an inserter without a booklet feeder. If a booklet feeder was installed here, only the
front side covers would pivot up to help you gain access to the buffer and dump station.
Item Description
1 Folder Cover / Buffer Entrance
2 Left Buffer Cover (closed)
3 Right Buffer Cover (closed)
Non-Booklet Feeder Option
Error Recovery
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 215 of 328
To Next Page
Loading...