Epic v3.1 Engine (ZVE0)
The ZVE0 Epic v3.1 Engine / Sealer / Takeaway modules consists of the three areas described here.
The engine supports letter and flat envelopes.
Description
The Engine / Sealer / Takeaway modules include:
l Envelope Hopper
l Envelope Feeder and Separator
l Envelope Flapper
l Insertion Engine
l 90° transfer module (changes direction of envelope to be transported downstream to output;
adjusts automatically)
l Sealer modules
l Programmable and automatic setup features
l V-Bin (one, integrated)
Standard Features
l Envelope Hopper - capacity of approximately 2,500 letter envelopes or 1,000 flat envelopes
l Vacuum valve and Servo feed head mechanism to feed and separate the envelopes
l Envelope feed assist
l Transport and Servo flapper device to detect envelope skew and open the envelope flap
l Ability to re-feed envelopes not flapped
l Insertion engine capable of processing letter envelopes and flat envelopes (flat is an option)
l Up to .5” (12.7 mm) or 120 sheets 24 lb (90 gsm) of total collation thickness
l The sealer moistens the flap of the envelope, closes the envelope flap, and transports the
mailpiece to the next module
l An integrated Vertical Stacker outsorts mail pieces before final stacking in the stacker
Specifications
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 276 of 328
To Next Page