Adjusting the Booklet Feeder Pack Control Ramp
Note:
This procedure is for standard booklet feeders.
The pack control ramp helps relieve weight off the inserts as they are fed into the separator. This allows
inserts to be placed continuously into the separator of the feeder.
Note:
Prior to doing this, it's easier if the separator gap has already been set. If not, the separator gap may
need to be adjusted (opened) to get the material to fit between the separator roller and lower feed
roller.
Operator Adjustments
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 151 of 328
To Next Page
Loading...