Pitney Bowes Epic v3.1 - Using the Jog Function on the Rotary Feeder

Using the Jog Function on the Rotary Feeder
The jog function slowly cycles material out of the rotary feeder for clearing jams or checking feeder setup.
Jog Features
There are two Jog functions you can use with the rotary feeder:
l Jog Only - This jog feature is for clearing jams. It turns the feeder drum one cycle so you can
easily remove jammed material.
l Feed with Jog - This jog feature can help verify feeder setup. It clears all the material in the feeder
drum and then acquires and feeds another insert to confirm correct setup.
Operator Adjustments
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 133 of 328