Pitney Bowes Epic v3.1 - Logging in and Logging out of DC

Logging In and Logging Out of DC
There are a few different login levels in DC. Options and features you see or have access to vary
depending on your user access level - Operator, Key Operator, Manager, Service, Administrator and
Engineer.
Logging In
1. Click the Login button on the main DC screen.
2. Select Login from the drop-down menu.
3. When the User Login dialog opens, double-click Operator (or your login name).
4. When prompted, enter your password and click OK.
Logging Out
1. Click the Login button on the main DC screen.
2. Select Logout from the drop-down menu.
Note:
l When no one is logged in, the Login button shows a locked padlock icon.
l When a user is logged in, the Login button shows an unlocked padlock icon and the operator's
name is displayed in the banner area of the screen.
Using Direct Connect
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 33 of 328