Adjusting the Rotary Feeder Deck Position
The rotary feeder deck holds the material. You can adjust the position of the deck so the material is
properly positioned for inserting.
Rotary Feeder Deck Position Settings
The position of the rotary feeder deck depends on the type of material you are running. Use this table as
a reference when setting the deck position.
Material Type Deck Position
#10, A4 (single sheet) 3
Half-fold, non-glossy (single sheet) 4
Half-fold, glossy 3, 4
Folded, perfume 2
BRE 2
Booklet (thick .125" max) 1
Booklet (thin) 1
Operator Adjustments
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 124 of 328
To Next Page