Moving the Flat Stacker
The flat stacker is used when flat envelopes (non-folded collations) are processed on the input. The
stacker is mounted under the designated stacker that has the appropriate mounting features and
electrical connections to make it work
When you are not running flat envelopes, the stacker can be removed from the work cell to increase
access to the On Edge Stacker.
Note:
The stacker can be removed and installed while the system is powered on.
Operator Adjustments
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 84 of 328
To Next Page
Loading...