Reloading the Envelope Feeder
As the envelope feeder empties, the feeder paddle keeps constant pressure on the envelope stack and
moves it toward the envelope feed head. When the stack reaches approximately the last 500 envelopes,
a “BIN LOW” warning displays on the DC main screen. At this point, when the operator adds more
envelopes to the feeder, the system will continue to run and the warning message turns off.
Follow these steps to reload envelopes while the inserter is running.
Caution: Pinch Point
The envelopes rest on rotating bars while the machine is running. Do not allow your
fingers to come into contact with these bars while the machine is running.
Running the System
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 196 of 328
To Next Page