Epic On-Edge Stacker (Y396)
The On-Edge Stacker is a labor savings output device that simplifies the handling of finished mail pieces
to optimize production workflow and efficiencies. Finished mail pieces are stacked on edge for greater
stacking density, allowing less frequent unloading of the output stacker. Unloading occurs without
stopping inserter operation, thereby maintaining high system throughput.
The On-Edge Stacker is configured standard with a sliding drawer just under the belt stacker where mail
trays can be placed for fast and easy unloading from either side of the stacker.
The main components of the On-Edge Stacker include the belt turn-up, a 7’ (2.1 m) belted stacker and a
sliding drawer.
The On-Edge Stacker can also be equipped with an optional Offset Kit to provide a visible break in the
material flow, automating the production workflow even more. This Offset Kit can be activated to identify
tray, zip or count breaks.
Specifications
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 317 of 328
To Next Page
Loading...