Expected Lifetime
The Epic Inserter design will meet a minimum life expectancy of 250M cycles or the equivalent of 10 yrs
from the time of manufacture. This expectation can be met or exceeded when the recommended
preliminary maintenance at the appropriate intervals has been performed.
Every 100M cycles a detailed mechanical inspection of the system must be done to identify any potential
breakdowns. This audit could identify parts replacement for non-standard parts. In this case, there would
be a proposal made to the customer to provide this 100M service above the standard support.
Specifications
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 327 of 328
To Next Page
Loading...