Epic Universal Friction Feeder (ZVF1)
The Universal Friction Feeder (ZVF1), also known as the "booklet feeder," is designed with a
specialized, full range of material feeding technology including booklets.
Standard Features
l Servo controlled
l Double detection and Fail to Feed detection
l Easy operator setup for material changeover
l Single booklet feeder typically mounts in most upstream chassis position and in this position it
comes with an extended feed hopper (located over the top of the buffer), additional loading
capacity
l Can be mounted in any other chassis position but without extended feed hopper
l Takes two to three feeder positions (depending on chassis position)
Cycling Speed
Enclosure Length (Depth) Cycling Speed (Max)
<4" (102 mm) up to 21K
4" (102 mm) - 6.25" (159 mm) up to 18K
6.25" (159 mm) up to 14K
* Actual cycling speed will be insert and application dependent; see section 6 in the Performance Guide
Specifications
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 305 of 328
To Next Page