On Edge Stacker Maintenance
Perform these maintenance activities daily.
Note:
All routine maintenance must be performed with the system logged off.
Required Tools
l Soapy water
l Clean rags
l Shop air
Clearing Paper Path and Cleaning Components
1. Open both On Edge Stacker doors.
2. Use the shop air with the blower attachment to blow dust and debris out of the paper path.
3. Wipe down the rollers with a clean, damp cloth (soapy water).
4. Wipe down the back plate with a clean, damp cloth (soapy water).
5. Close the doors.
Maintenance
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 270 of 328
To Next Page
Loading...