Indicator Lights
System indicator lights are located in various areas on the inserter. When an error occurs or operator
intervention is needed, the indicator light will illuminate to a bright yellow (steady on or flashing) to help
direct an operator to the appropriate area of the machine.
Indicator lights also alert operators when there is an open cover or ESTOP activated and when the
material in the insert feeder gets low.
LED State Meaning
OFF Ready to run
Slow blink Feeder material low
Fast blink Interlock open
ON Jam
System Indicator Lights
System Indicator Lights
Product Overview
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 17 of 328
To Next Page
Loading...