Removing Finished Mail from the On Edge Stacker
The On Edge Stacker is equipped with a control paddle to aid in the stacking of finished mailpieces. The
paddle is able to move the full length of the stacker conveyer belt and it also pivots up vertically.
When finished mailpieces reach the stacker belt the paddle will slowly move down the conveyor belt,
allowing more mail to be stacked on the belt. As the belt becomes full of finished mail, the mail is ready to
be placed into a mail tray.
Stacker Paddle
Running the System
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 202 of 328
To Next Page