Adjusting the Booklet Feeder Separator Gap
The separator gap is the space between the separator stone or stripper bar and material. This space can
be adjusted to accommodate different types and thicknesses of material.
The adjustment outlined here gets the gap very close to the final setting, but additional fine tuning may be
required.
1. Loosen the feeder side guide thumbscrews and slide the guides to their widest position.
2. Loosen the pack control knob and slide the pack control ramp to the left.
Operator Adjustments
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 145 of 328
To Next Page
Loading...