Air Requirements
The correct compressed air supply for the Epic inserter is critical to the operation of the system. Follow
these guidelines or contact PB Service or Engineering with questions.
No presently released PB air compressor satisfies the requirements of the Epic inserting system. The
recommended vendor will provide the equipment and service required to maintain a compressed air
system to work with PB equipment.
l Air requirements: 6.3 SCFM @ 70 PSI
l .375" quick disconnect fitting included on the system
Specifications
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 326 of 328
To Next Page