Pitney Bowes Epic v3.1 - Environmental Operating Conditions

Environmental Operating Conditions
The Epic Inserting system meets the environmental requirements in PB Standard G2605 "Operating
Conditions" (June 1985, revised April 1986). The Epic is RoHS compliant.
Temperature and Humidity
Temperature Humidity (%) Max Wet Bulb Temp
°F °C
Min Max Min Max Min Max °F °C
Normal 55 95 13 35 30 80 80 27
Storage 15 120 -9 49 5 95 85 29
Shipping -40 140 -40 60 0.5 100 (3.6) 85 29
Temperature and Humidity Tips
l Humidity control is not required below 33° C (1° C wet bulb)
l Shipping refers to product prepared for shipping. All requirements assume that the equipment is
drained of all the aqueous liquids and any device with an open sump.
l Include condensation, excluding rain.
l The system should satisfy performance requirements over the normal operating range of
conditions. A loss of performance may occur at environmental conditions outside the normal
operation range. Performance may degrade at environmental extremes.
l Paper has different humidity control requirements for normal operating conditions, storage, and
shipping.
l 100% relative humidity up to 85° F.
Specifications
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 323 of 328