Maintenance
l Operators must understand and adhere to safety precautions when working with the equipment.
l Only qualified service personnel should service this equipment per local national requirements.
l Service that requires removal of protective covering is performed by qualified service personnel.
l Only setup maintenance, as described in the information provided, is to be performed by
operators.
l A setup tool is supplied for adjustments to accommodate different size paper on the inserter.
l Use only Pitney Bowes approved printer ink and cleaners.
l To prevent overheating, do not cover the vent openings.
l Do not store flammable fluids inside this machine.
l Do not place any container with liquid on this machine, (i.e. coffee cups, soda, etc.)
l Do not use flammable cleaners in this machine.
l Do not use aerosol air canisters. It is recommended that a vacuum cleaner be used to remove dust
and debris from the machine paper path. If you have to use shop air, turn the system off before you
begin cleaning. Verify the shop air does not contain excessive oil or water.
l Do not spray liquid onto or into any part of the machine. Use a cloth to apply cleaning solution.
Safety
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 5 of 328
To Next Page
Loading...