Clearing Jams Using the "Jog Only" Function
In the event of a jam, you initiate the Jog Only function from DC and then use the mechanical Jog button
on the rotary feeder to move the material out of the feeder.
Note:
When you are clearing material jams from the rotary feeder, do not physically pull the material from the
transport belts. Use the Jog button to move the material to the deck for easy removal.
1. Click the desired Rotary Feeder object on the main DC screen.
Feeder Objects
2. Select Jog Only from the drop-down list. (If Jog Only is not in the drop-down list, select Feed with
Jog; click the Feeder object again and Jog Only is now listed. )
Operator Adjustments
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 134 of 328
To Next Page
Loading...