4. Lower the feeder down being cautious not to allow feeder to drop onto deck.
5. Close any opened front feeder covers.
Separator Bridge
1. Pull the two locking knobs towards you.
2. Rotate the separator bridge to the left while continuing to pull on the two locking knobs away from
you and lift the friction feeder separator bridge.
Rotate Knob - Lift Separator Bridge
3. Release the locking knobs.
4. Remove the jam.
5. Close the separator bridge; make sure both locking knobs latch closed.
Error Recovery
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 222 of 328
To Next Page