6. Installing the horn strap:
a. If you are installing the narrow horns, install the narrow strap. If you are installing the standard
or wide horns, install the wide strap.
b. Select the correct width and orientation (left or right) and slide the slotted mounting bracket
under the mounting screw and between the horn opening.
c. Tighten the horn mounting screw in place and verify that the horn pivots freely without binds.
Item Description
1 Mounting Screw
2 Horn Strap
3 Horn
Install Horn Strap
7. Load the mode for the new application.
Operator Adjustments
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 70 of 328
To Next Page
Loading...