User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
1. This utility shows all necessary information from the devices, such as MAC Address, Device Name, firmware version and
Device IP Subnet address. It can also assign new password, IP Subnet address and description for the devices.
2. After setup is completed, press “Update Device”, “Update Multi” or “Update All” button to take effect. The meaning of
the 3 buttons above are shown below:
Update Device: use current setting on one single device.
Update Multi: use current setting on choose multi-devices.
Update All: use current setting on whole devices in the list.
The same functions mentioned above also can be found in “Option” tools bar.
3. To click the “Control Packet Force Broadcast” function, it allows you to assign a new setting value to the Web Smart
Switch under a different IP subnet address.
4. Press “Connect to Device” button and the input usrname/password in web login screen and the web main screen appears
in Figure 3-4.
5. Press “Exit” button to shut down the Planet Smart Discovery Utility.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
