Settings Overview8.1
This section describes two types of settings that are available on your system:
• User settings:These are temporary changes to your system settings.They only last
as long as the user who applies them is logged in.
• Supervisor settings: These are changes to your Default System Settings. Any
change made in Supervisor Mode will be saved by your system after you have logged
out.
Other user settings are described in the corresponding sections:
Processing Mail on page 21, Maintaining your Mailing System on
page 179, etc.
User Settings
System Settings that can be changed by a User include:
• The Language Setting.
• Your Screen Contrast.
• Sounds, Warning Alerts and Error Alerts.
Supervisor Settings
Your Mailing System has one supervisor PIN code that allows you to configure the default
settings and perform other functions such as managing accounts and access rights,
generating certain reports, etc.
The Supervisor PIN code of the system has been provided to your
organization in a separate distribution.
The supervisor settings allow you to:
• Change the default user settings
• Modify system time-outs and activate the Smart Start function
• Set funds warnings (high amount, low funds) and activate a funding PIN code
• Define a default weighing method for mailing, and calibrate the weighing devices
• Design a default impression (postage rate, slogan), activate the Automatic Date
Advance function and set a default printing offset
• System Connection Preferences.
133
| Page 133 | | Jan-13-2017 10:32 |
8
Configuring your Mailing System
To Next Page
Loading...
Need help?
General
