quadient IN-360 - How to Change the Default Permit Impression; How to Change the Default Slogan

Changing the Default Permit Impression
This setting defines the Permit Impression that is automatically activated by your system
each time a User begins to set up a Permit Mail Job Run.
How to Change the Default Permit Impression
To change the default permit impression:
1. As supervisor (see How to Log in as Supervisor on page 134):
Press and or select the path: Default User Settings Default Impression
Setting Permit mail
2. Select the default Permit Impression in the list.
3. Press [OK] to validate.
See also
• To change the current Permit Impression, see How to Select a Permit Impression
on page 63.
• To manage the Permit Impression, see Managing Permit Impressions on page 177.
Changing the Default Slogans
How to Change the Default Slogan
To change the default Slogan:
1. As supervisor (see How to Log in as Supervisor on page 134):
Press and select the path: Default User Settings Default Impression
Setting
2. Select Imprint Left or Imprint Right and press [OK].
3. Select the default slogan from the list, or None for no slogan.
4. Press [OK] to validate.
156
| Page 156 | Jan-13-2017 10:32 |
8
Configuring your Mailing System