Setting an Impression Memory for [Permit] Mail
To set the meter impression quickly, consider using impression
memories.The impression memories store impression
characteristics together with postage rates and, if active, accounts.
See Using Impression Memories on page 71.
Processing [Permit] Mail
To run mail, follow the procedure below after you have completed the sequence in How to
Set Postage for [Permit] Mail on page 41.
If you need to change the Account to allocate the postage costs to,
(on Account-enabled configurations), see How to Change Account
on page 60.
How to Process [Permit] Mail
In Standard weighing mode ( ).
From the [Standard] home screen, to print directly on mail pieces:
1. Put the mail piece on the Weighing Platform.
The weight of the mail piece is displayed in the Weight area of the screen.
2.
Press .The system motors start running.
If the Smart Start function is activated, the motors start automatically
when you withdraw the mail piece from the weighing platform.To
enable Smart Start, see How to Activate / Deactivate Smart Start
on page 144.
42
| Page 42 | Jan-13-2017 10:32 |
3
Processing Mail
To Next Page
Loading...
Need help?
General
