How to Set [Permit] Mail
Required settings:
1. Check that you are in the [Permit] type of impression.
If not, see section Selecting a Meter Impression on page 29.
2.
Press to access the build impression menu and perform the settings that
follow.
3. Select a Permit to use.
See How to Select a Permit Impression on page 63.
4. Select a weighing mode.
Depending on the quantity and type of mail you have to process, you can choose an
efficient weighing method that uses the weighing platform to save time: see Choosing
a Weighing Mode on page 64.
To change the current weighing mode, press and select a weighing mode in
the Weighing mode screen.
For more details, see How to Change the Weighing Mode on page 66.
3
Processing Mail
41
| Page 41 | Jan-13-2017 10:32 |
To Next Page
Loading...
