How to Adjust the Time-outs
To adjust the time-outs:
1. As a user:
Press and select the path: System settings Time-Out settings
The Time-out setting screen is displayed.
2. Specify the length of each time-out using the keypad and press [OK] to display the
next screen, until the Summary screen is displayed.
Use the [C] key to clear old settings then enter a new value.
3. Press [OK] to exit.
This is a User Setting that will only be active as long as you are
logged in as a User. Once you log out, the Default Time-Out
Settings will be re-activated.
142
| Page 142 | Jan-13-2017 10:32 |
8
Configuring your Mailing System
To Next Page
Loading...
