How to Run the Registration Update
To run the registration update:
1. As supervisor (see How to Log in as Supervisor on page 134):
Press and select the path: Maintenance Processes
A confirmation message is displayed.
2. Press [OK].
3. Select Update registration.
4. Press Continue twice to start the Update Registration Process.
A message "Transaction completed" is displayed.
5. Press [OK] twice.
6. Enter the Geocode. Please refer to the User guide for the code values.
7. Press [OK].
The registration update process is finished.
8. Press Finish to return to the supervisor main menu.
196
| Page 196 | Jan-13-2017 10:32 |
10
Maintaining your Mailing System
To Next Page
Loading...
