You can also apply this optional setting:
1. Move the impression away from the envelope edge for thick envelopes: see How
to Move the Meter Impression (Print Offset) on page 70.
You are now ready to print.
Processing [Received] Mail
To run mail, follow the procedure below after you have completed the steps in How to Set
[RECEIVED/RECU] Mode printing on page 54.
How to Process [Received] Mail
On the [Received] home screen:
1.
Press . System motors start running.
2. Insert the envelope into the mail path against the rear-guide wall, with the side to be
printed facing upwards.
The Mailing System applies the impression and the mail piece is ejected.
3
Processing Mail
55
| Page 55 | Jan-13-2017 10:32 |
To Next Page
Loading...
