5. Reinstall the sponge and retainer.
6. Put the brush back.
7. Put the moistener back into place.
Cleaning Mail Path Sensors
The sensors are light sensitive devices successively covered by the envelopes during their
travel along the mail path.
Cleaning the Mail Path Sensors
To clean the mail path sensors:
1. Use a damp cloth or 70° alcohol on a cotton applicator.
2. Allow the parts to dry and close all covers and assemblies.
10
Maintaining your Mailing System
193
| Page 193 | Jan-13-2017 10:32 |
To Next Page
Loading...
Need help?
General
