Setting [Seal Only] Mail processing
The instructions below outline the steps that you need to complete to set up your system
to run in Seal Only Mode.
• As mail requirements differ from day to day, some of the Impression Options may
not be necessary, or their order may vary.
• Begin by selecting a Meter Impression to gain access to the Impression Options that
you may need to process your system in Seal Only Mode.
Make sure you have completed the preparation steps mentioned
in Preparing and Starting your Job Run on page 26.
How to Set [Seal Only] Mail
Main setting:
1. Make sure you are on the home screen of the [Seal Only] type of impression.
The type of impression is indicated at the top of the home screen as illustrated.
3
Processing Mail
57
| Page 57 | Jan-13-2017 10:32 |
To Next Page
Loading...
Need help?
General
