Setting Default Time-Outs
How to Change System Time-Outs
To change the system time-Outs:
1. As Supervisor (see How to Log in as Supervisor on page 134)
Press and select the path: Default user settings Time-Out settings
The Time-out setting screen is displayed.
2. Specify the length of each time-out using the keypad and press [OK] to display the
next screen, until the Summary screen is displayed.
Use the [C] key to clear old settings then enter a new value.
3. Press [OK] to validate.
Smart Start
The Smart Start function detects when you are removing a mail piece from the weighing
platform and automatically starts the system motors without you having to press the
key.
8
Configuring your Mailing System
143
| Page 143 | Jan-13-2017 10:32 |
To Next Page
Loading...
