How to Display Hardware Data
To display hardware data:
1. As supervisor (see How to Log in as Supervisor on page 134):
Press and select the path: Maintenance System info Hardware
information
2. The system hardware data appears on the screen.
How to Display the Event Lists
To display the event lists:
1. As supervisor (see How to Log in as Supervisor on page 134):
Press and select the path: Maintenance System info Event list
2. Select the Base events list or the Meter events list or Server connection history
3. Press [OK] to validate.
4. The system displays the selected list in a table which includes:
The Code of the event
The Date and time of the event
The Cycles count when the event occurred.
5. Note the Code and refer to your customer service.
11
Troubleshooting
203
| Page 203 | Jan-13-2017 10:32 |