Frequently Asked Questions
System check list:
AnswerQuestion...
Press and enter 1 to check your funds balance.
To add funds, see How to Add Postage Funds on
page 79.
You can set up your system to alert you when your
available Postage Funds fall below a preset value
(see How to Set the Low-Funds Threshold on page
146)
Do I have enough postage?
Clear batch counters if you intend to issue a report
on the mail run you are about to start (see Batch Re-
port on page 106).
See How to Reset Batch Counters on page 73.
Do I need to clear the Batch
Counter?
For sealing the envelopes.
For moistener-equipped hand-feed tables, see Filling
the Moistener (Option) on page 191.
Is the Sealing Fluid Container
properly filled?
Before placing envelope(s) on the Weighing Platform,
your Home Screen should display 0 g. If __g is dis-
played, press and hold the key to zero the
WP.
See How to Rezero the Weighing Platform on page
150.
Is the Weighing Platform prop-
erly zeroed or tared?
To display the level of ink in the printing headset, see
How to Display Ink Level and Cartridge Data on page
182.
Is there enough ink in the cart-
ridge?
3
Processing Mail
31
| Page 31 | Jan-13-2017 10:32 |
To Next Page
Loading...
Need help?
General
