2. To change the type of meter impression, if you are not in [Postage Value
Correction] mode.
Press to access the Build Impression screen, and then press [OK] to display
the Type of impression screen.
Select [Postage correction] in the list and press [OK] to validate.
To select an option in the screen:
– Highlight the option using the arrow keys and
– Then press to validate your selection.
3. Enter the additional postage amount.
From the Home screen:
- Begin to type in the amount (keys 1 to 9 or dot).The Amount entry screen is displayed.
- Type the amount in and press [OK] to validate and return to the home screen.
From the Build Impression screen:
- Select the Amount line.
- Type the amount in and press [OK] to validate.
Press to return to the home screen.
You are now ready to print the envelopes.
48
| Page 48 | Jan-13-2017 10:32 |
3
Processing Mail
To Next Page
Loading...
