quadient IN-600 - Page 47

3. Remove the envelope from the WP and insert it into the mail path against the rear-guide
wall, with the side to be printed facing upwards.
If a mail piece is bigger than mail path maximum thickness, press
to print a label.The label is printed.To know the maximum
thickness, see Mail Specifications on page 237.
4. The Mailing System prints postage and the mail piece (or label) is sent to the catch
tray.
When using the Sealer, collect the mail piece stack in the catch
tray and put stack aside to let envelopes dry.
If you want to print several identical labels:
1.
Press and enter the number of labels.
Make sure there is enough labels are available in the label dispenser (see Filling the
Label Dispenser on page 83).
2.
Press to print the labels.
In optional mode Differential Weighing ( ):
From the [Standard] home screen:
1. Place the stack of mail to process on the Weighing Platform, then follow the instructions
on the screen or the steps below.
2. Withdraw the first mail piece from the top of the stack.The Mailing System displays
weight and postage on the home screen and starts motors automatically.
42
| Page 42 | Jan-13-2017 10:45 |
3
Processing Mail