3. Repeat the previous step for each piece of mail.
To quit the process at any time, press .
When you remove the last object from the Weighing Platform,
the Mailing System will ask if you want to print it.You can answer
Yes or No.
In other modes (Manual Weight Entry , no weight ...):
From the [Standard] home screen:
1.
Press . System motors start running.
2. Insert the envelope into the mail path against the rear-guide wall, side to be printed
facing upwards.
If a mail piece is bigger than mail path maximum thickness, press
to print a label.The label is printed.To know the maximum
thickness, see Mail Specifications on page 237.
3. The Mailing System applies postage and the mail piece (or label) is sent to the catch
tray.
When using the Sealer, collect the mail stack in the catch tray and
put stack aside to let envelopes dry.
44
| Page 44 | Jan-13-2017 10:45 |
3
Processing Mail
To Next Page
Loading...
