quadient IX-7 - How to Activate; Deactivate an Operator; How to Delete an Operator

How to Activate / Deactivate an Operator
The ability to select the status of an operator allows you to create as many operators
as you need in advance. Users cannot use deactivated operator PIN codes for new
operators.
To activate or deactivate an Operator:
1. Perform procedure How to Modify an Existing Operator on page 172.
2. In the operator options, select the line Status to activate or deactivate the operator
(the button displays the current status), and then press [OK].
3. Once the Operator modification summary screen appears, press [OK].
How to Delete an Operator
To delete an Operator:
1. Perform procedure How to Modify an Existing Operator on page 172.
2. Select Delete instead of Edit/Del.
The Delete confirmation screen is displayed.
3.
Press [OK] to delete the operator, otherwise press .
6
Accounts and Access Control
175
| Page 175 | Jun-22-2021 11:01 |