You can log in as supervisor by directly typing the supervisor
PIN code, in place of a regular user PIN code, on Mailing Systems
that ask for a PIN code at start-up.
How to Exit the Supervisor Mode
Follow the step below to exit the supervisor mode. You must exit the supervisor Mode
before you can begin to print postage.
To exit the supervisor mode, you have to be in the main menu.
To exit the supervisor mode:
1. As supervisor:
Press .
The system will go into 'Sleep' mode and supervisor is logged out.
242
| Page 242 | Jun-22-2021 11:01 |
10
Configuring your Mailing System
To Next Page
Loading...
Need help?
General
