quadient IX-7 - How to Display the Machine Counters

1. As supervisor (see How to Log in as Supervisor on page 241):
Press and select the path: Maintenance System info Event list
2. Select the Base Events list or the Meter Events list or Server Connection History.
3. Press [OK] to validate.
4. The system displays the selected list in a table with, for each error:
The Code of the event.
The Date where appends the event.
The Cycles count when the event occurred.
The Description.
The Category.
5. Note the Code and refer to your customer service.
How to Display the Machine Counters
To display the data of the machine counters:
13
Troubleshooting
363
| Page 363 | Jun-22-2021 11:01 |