How to Set the Default Printing Offset
The printing offset is the distance between the right edge of the envelope and the
imprint.
You can increase the distance by about 5mm or 10mm.
To change the default printing offset:
1. As supervisor (see How to Log in as Supervisor on page 241):
From the main menu, select the path: Default user settings Base settings
Print offset
2. Set the default print position from the list.
3. Press [OK] to validate.
276
| Page 276 | Jun-22-2021 11:01 |
10
Configuring your Mailing System
To Next Page
Loading...
Need help?
General
