quadient IX-7 - How to Clean the Brushes and Sponge (Sealer)

How to Clean the Brushes and Sponge (Sealer)
MAKE SURE YOUR SYSTEM IS DISCONNECTED FROM POWER
SOURCE BEFORE CLEANING!
To clean the brushes and sponge of the feeder:
1. Open the feeder and push the left of the upper blue release lever to raise the upper
drive assembly.
2. Pull up the brush release lever.
3. Raise the brush and lift the complete brush holder assembly.
13
Troubleshooting
353
| Page 353 | Jun-22-2021 11:01 |