quadient IX-7 - Postage Imprint Default Settings; How to Change the Default Rate

Postage Imprint Default Settings10.7
The settings of the postage imprint 'by default' include:
• Imprint default settings: sets the default rate, ERA and slogan for mailing
operations
• Automatic Date Advance: enables early date change to continue printing postage
with the new date after post office closing hours
• Printing offset: sets the default offset print position from the right side of the
envelope.
Imprint Default Settings
You can set default parameters for the imprint elements that follow:
• Rate
• Prepaid imprint
• ERA
• Slogan
On list screens, a mark indicates the default parameter.
How to Change the Default Rate
Use the procedure below to change the rate the machine activates at start-up.
To change the default rate:
1. As supervisor (see How to Log in as Supervisor on page 241):
From the main menu, select the path: Default user settings Default imprint
parameters Default rate
271
| Page 271 | | Jun-22-2021 11:01 |
10
Configuring your Mailing System