GEO Code
The Weighing Platform calculates mail piece weights that have to be corrected
according to the geographical location of the Mailing System, as weights can change
with the altitude and latitude. The correcting geodesic code may be entered:
• Automatically with Online Services
• Manually
How to Change the GEO Code
To change the GEO code manually, follow the steps below.
Changing the GEO code modifies the weight values the Mailing
System calculates. Make sure you enter the correct GEO Code
to ensure your weights bare accurate.
To change the GEO code:
1. As supervisor (see How to Log in as Supervisor on page 241):
From the main menu, select the path: Machine settings Accessories and
module settings Geo code
10
Configuring your Mailing System
267
| Page 267 | Jun-22-2021 11:01 |
To Next Page
Loading...
Need help?
General
