How to Add PPI's
You can add PPI's to the machine using a USB memory key as follows.
To add a PPI:
1. As supervisor (see How to Log in as Supervisor on page 241):
From the main menu, select the path: Options and Updates Update PPI
The list of PPI's is displayed in the PPI management screen.
2. Select Add new and connect the memory device to a USB port of the machine (on
your left hand side at the rear of the base: see Connectors on page 25).
320
| Page 320 | Jun-22-2021 11:01 |
11
Options and Updates
To Next Page
Loading...
