How to Process [PPI] Mail
In mode Standard weighing ( )
From the home screen:
1. Put the mail piece on the Weighing Platform.
The weight of the mail piece is displayed in the Weight area of the screen and the
postage amount is updated.
2.
Press . The system motors start running.
3. Remove the envelope from the WP and insert it into the mail path against the
rear-guide wall, side to be printed facing upwards.
If mail piece is bigger than mail path maximum thickness (see Mail Specifications
on page 367), press before you press to print a label. The label is printed
at once.
The Mailing System applies postage and the mail piece (or label) is sent to the
catch tray.
When using sealer, collect the mail piece stack in the catch tray
and put stack aside to let envelopes dry.
Otherwise, if you want to print several identical labels:
3
Processing Mail
61
| Page 61 | Jun-22-2021 11:01 |
To Next Page
Loading...
Need help?
General
