2. Close envelopes using the feeder sealer: see Using the Sealing Function on page
97.
You are now ready to print.
How to Process [Normal] Mail
Mail processing mainly depends on the weighing method you have chosen. It is indicated
by the icon in the Weighing Type zone of the screen.
In mode Standard Weighing ( ):
From the [Normal] home screen, to print postage directly on mail pieces:
1. Put the mail piece on the Weighing Platform.
The weight of the mail piece is displayed in the Weight area of the screen and the
postage amount is updated.
2.
Press . The system motors start running.
3. Remove the envelope from the WP and insert it into the mail path against the
rear-guide wall, with the side to be printed facing upwards.
If a mail piece is bigger than mail path maximum thickness, press to print a
label. The label is printed. To know the maximum thickness, see Mail Specifications
on page 367.
4. The Mailing System prints postage and the mail piece (or label) is sent to the catch
tray.
When using sealer, collect the mail piece stack in the catch tray
and put stack aside to let envelopes dry.
If you want to print several identical labels:
46
| Page 46 | Jun-22-2021 11:01 |
3
Processing Mail
To Next Page
Loading...
Need help?
General
